Audio Visual Alarm |
PIPELINE CRAWLERS • PORTABLE X-RAY BETATRON • DIGITAL RADIOGRAPHY
The JME Audio/Visual Radiation Alarm is a tool to assist Radiographers in environments where controlled exposure bays are not possible. Typical applications are landlines and offshore pipeline barges.
The JME Audio/Visual Radiation Alarm is normally used close to the area of x-ray emission to indicate visually and audibly the presence of Ionising Radiation.
The JME Audio/Visual Radiation Alarm has a built in battery charger to enable the internal battery to be recharged without removing the battery. Typical battery recharge time is approximately 12 hours.
Please Note: This is not a personnel radiation monitor nor should be used as one.
AUDIO VISUAL ALARM RA1 TECHNICAL SPECIFICATION
| Power Requirements | 12V DC 5Ah Sealed Lead Acid Battery |
|---|---|
| Construction | Sealed Polycarbonate case with Polymide handle and side plates |
| Current Consumption | Lamps (each): 200mA (pulsed @ 1Hz) Sounder: 25mA Control Circuit: 20mA |
| Sounder Volume | 95dB @ 1M |
| Sounder Tones | Continuous: Radiation Imminent Intermittent: Radiation on |
| Radiation Detection Circuit | Sensitivity: 20 μSv/h |
| Operating Time (continuous) | Approx. 14Hrs |
| Charger (supplied with unit) | Input: 90-264VAC, 57-63Hz Output: 13.7VDC 1A |
| Operating Temperature | -20°c to +50°c |
| Overall Dimensions (aerial in open configuration) |
254 x 89.5 x 400mm (10″ x 3.5″ x 15.7″) |
| Radio Range | 2 KM |
FOR MORE INFORMATION
Contact JME Advanced Inspection Systems on +44(0)1502 500969 or use our Contact Form >
DOWNLOAD DATASHEET
ACCESSORIES
REQUEST QUOTATION
JME PIPELINE CRAWLER
AND ACCESSORIES
Download and complete the
PDF quotation request form.
COMPANY
LOCATION
JME Ltd.
Electron House
Old Nelson Street
Lowestoft, Suffolk
NR32 1EQ
UNITED KINGDOM
PROUDLY SUPPLYING THE NDT INDUSTRY FOR OVER 35 YEARS
Company Registration No 2056386 - Registered in England & Wales
VAT No GB 443 0172 87 © JME LTD - 1986-2024. All Rights Reserved.