JME’s 24:CR2 Pipeline Crawler is specifically designed for non-destructive testing of circumferential butt welds in tubular installations such as oil and gas transmission pipelines.

Our 2nd Generation CR2 range is the world’s most ‘Technologically Advanced’ NDT crawler system. The JME 24:CR2 Pipeline Crawler is robust and suitable for use in a wide range of challenging environmental conditions. Deployable in an Internal Diameter (ID) range between 22″ (558mm) and a maximum of 60″ (1524mm). Coupled with X-Ray generators from Balteau, Comet and ICM, this system can produce internal panoramic single-wall-single-image (SWSI) radiographs of very high quality.

The crawler can be commanded using JME’s Magnetic Control System (Magnetope), or a conventional isotope control system, additional features are accessible using our brand new CR2 Remote Handset.

TECHNICAL SPECIFICATION

All specifications correct at time of upload – Please check specification updates before purchase

NEW FEATURES

REMOTE HANDSET: MULTI LANGUAGE TOUCH SCREEN

JME’s unique Handset allows external control and monitoring of the crawler whilst operating in the pipe, providing real time data on the crawler’s activity. It allows the operator to enable/disable all features of the Crawler and X-Ray generator prior to operation, avoiding a lengthy, complex analogue configuration.

CUSTOMISABLE ‘ANTI RUNAWAY’

‘Anti Runaway’ is a system which puts the crawler into reverse if it does not receive a signal from the Magnetope or Handset within a specified time period.

INTEGRATED RADIO RECOVERY

In the event of a malfunction within the pipe, the crawler’s internal logic can be overridden by the handset to reverse the crawler out of the pipe.

AMAX – AUTO MOVE AFTER X-RAY

When AMAX is enabled, the crawler will locate under the Magnetope and be signalled to start the X-Ray. Once the exposure is complete the crawler will automatically drive to the next weld, increasing site efficiency.

END OF PIPE SENSOR KIT / WATER DETECTION SENSOR KIT

End of pipe and water detection sensors are fitted to the front and rear of the crawler. End of pipe sensors detect the Crawler’s proximity to the pipe entrance and stop the system automatically, preventing accidental damage to the equipment. Water detection sensors stop the crawler if water is detected within the pipe. A handset message is displayed in both instances to alert the user.

PROCESSOR CONTROLLED FOR EASY SOFTWARE UPGRADE

VARIABLE CRAWLER SPEED CONTROL

LED DISPLAY ON THE REAR OF E-BOX FOR EASIER SETUP

SINGLE MAGNETIC DETECTOR BOX – 0-40MM WALL THICKNESS

NON ISOTOPE CONTROL SYSTEM

• Suitable for wall thickness up to 40mm
• Rechargeable
• +/- 5mm Accurate positioning and motion control

NON ISOTOPE TRACKING SYSTEM

• Eliminates need for tracker isotope
• Improved transportation safety
• Improved crawler handling safety

X-RAY GENERATOR OPTIONS

	Balteau GFC 160C / GFC 200C / GFC 300C View Tube Information >
	Comet EVO 200KV or EVO 300KV View Tube Information >
	ICM SITEX 250KV-360KV View Tube Information >