A/V Alarm RA1
The JME Audio/Visual Radiation Alarm is a tool to assist Radiographers in environments where controlled exposure bays are not possible. Typical applications are landlines and offshore pipeline barges.
The JME Audio/Visual Radiation Alarm is normally used close to the area of x-ray emission to indicate visually and audibly the presence of Ionising Radiation.
The JME Audio/Visual Radiation Alarm has a built in battery charger to enable the internal battery to be recharged without removing the battery. Typical battery recharge time is approximately 12 hours.
Note: This is not a personnel radiation monitor nor should be used as one.
| Construction | Sealed polycarbonate case with St/Steel frame |
| Siren | 87dba @ 1M |
| Beacons | Amber / Red flash rate 1Hz |
| Tube life | > 1million flashes |
| Radiation sensors | Geiger Muller |
| Sensitivity | Factory set to 20 micro sieverts per hour |
| Power supply | 12V 7Ah sealed lead acid batteries |
| Battery charger | Integeral, Input 110V / 240V, Output 14V Max 2A |
| Battery consumption | 200 -250 mA |
| Operation time | 28 hours typical before recharge |
